| Sweep the surface to be cleaned to remove
loose material.
Decant the cleaning detergent into a bucket and then
using a MEDIUM PILE PAINT ROLLER, slowly and evenly
“roller coat” the area to be cleaned. Because
our rubber cleaning detergent contains a thickening
agent to help it to stay on top of the porous surface,
it is recommended that you do not dilute the product.
However, it has been found useful when using to agitate
the cleaner during application to form a foam on the
surface being cleaned. Allow at least 20 minutes
for the cleaning agents to work. Rinse the surface thoroughly
with a hose to remove all traces of the cleaner, ideally
wet vacuuming. Second and subsequent applications may
be required depending upon the severity of the contamination.
The cleaning detergent will leave a slight smell of
Chlorine on the surface and this will dissipate in a
few hours. This product is not designed to be harmful
to the pool environment, plants or animals once it has
been washed into adjoining soil areas. A product safety
data sheet is supplied with each order and available
on request. |
